See also:

Replacing license plate lamp bulbs
1. Make sure the headlamp switch is in the off position. 2. Remove the two screws from the license plate lamp assembly. 3. Remove bulb socket by turning counterclockwise. 4. Carefully pull ...

Daytime running lamps (DRL) (if equipped)
To activate: • the ignition must be in the on position, • the headlamp control must be in the off, autolamps or parking lamp position and • the transmission must be out of the P (Park) positi ...

Replacing front parking lamp/turn signal/sidemarker bulbs
1. Make sure headlamp switch is in the off position, then open the hood. 2. Reach in behind the headlamp assembly to access the bulb sockets and connectors. 3. Locate the parking/turn signal l ...