See also:

Activating hill start assist
1. Press the brake pedal to bring the vehicle to a complete standstill. Keep the brake pedal pressed. 2. If the sensors detect that the vehicle is on a slope, hill start assist will be activate ...

Removing the jumper cables
Remove the jumper cables in the reverse order that they were connected. Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Remove th ...

BLIS and/or CTA on/off and disable operation
The BLIS and/or the CTA can be turned off via the message center. If either the BLIS and/or the CTA is turned off, the systems will automatically turn back on at the next ignition key cycle. When ...