Locking the doors

1. Press
and release to lock
all the doors. The turn lamps will flash.
2. Press
and release again within
three seconds to confirm that all the
doors are closed.
Note: The doors will lock again, the horn will chirp and the turn lamps will illuminate once if all the doors and trunk are closed.
Note: If any door or the trunk is not closed, or if the hood is not closed in vehicles equipped with the perimeter alarm feature, the horn will chirp twice and the lamps will not illuminate.
See also:
Keyless entry keypad procedure
1. Turn the ignition to the off
position.
2. Close all the doors.
3. Enter factory–set 5–digit entry
code.
4. Press and hold the 3 • 4. While holding the 3 • 4, press and release
the 7 • ...
Programming MyKey Optional Settings
Turn the ignition on using an admin key. To program the optional
settings, use the message center buttons to do the following:
1. Press SETUP until RESET FOR MYKEY SETTINGS is displayed.
2. Press ...
Recreational towing
Follow these guidelines for your specific powertrain combination to tow
your vehicle for personal travel (such as behind a motor home or a
truck).
Note: Put your climate control system in recir ...
